Procurement Lots

  • Excavation for foundations, in all kinds of soil (except conglomeration of gravel and boulders, soft, sandy or disintegrated and hard rock) and back filling the excavated material all-round the trenches including breaking clods, watering, consolidat
    Address:Procurement office , Faculty Block - II , 2nd Floor , Comsats University , Park Road , Taralai Kalan, Islamabad Capital Territory Schedule:27 Days Quantity:80 / sqft
    Qty: 80
  • Providing and laying 4” thick 1:4:8 cement concrete using screened graded crushed stone 1/2" (13mm) and down gauge from approved source and lawrancepur sand as per specifications in foundation, under floor, under walk way including levelling, compact
    Address:Procurement office , Faculty Block - II , 2nd Floor , Comsats University , Park Road , Taralai Kalan, Islamabad Capital Territory Schedule:27 Days Quantity:90 / cft
    Qty: 90
  • Providing and laying first class solid burnt brick masonry set in CSM (1:6) in straight or curved walls 9” to 18" thick including scaffolding, raking, out joints and curing etc; complete in foundation, as directed by the Engineer Incharge .
    Address:Procurement office , Faculty Block - II , 2nd Floor , Comsats University , Park Road , Taralai Kalan, Islamabad Capital Territory Schedule:27 Days Quantity:55 / cft
    Qty: 55
  • Providing and laying 1:2:4 cement concrete hollow paving block masonry of 6”x8”x16” thick, set in CSM (1:4) in straight or curved walls including scaffolding, raking, out joints and curing etc; complete in ground floor, as directed by the Engineer In
    Address:Procurement office , Faculty Block - II , 2nd Floor , Comsats University , Park Road , Taralai Kalan, Islamabad Capital Territory Schedule:27 Days Quantity:120 / cft
    Qty: 120
  • Providing and laying Precast Slab, including Precast Gurder , 3” thick P:C:C (1:2:4) screeding, leveling and curing, etc. complerte as directed by the Engineer Incharge.
    Address:Procurement office , Faculty Block - II , 2nd Floor , Comsats University , Park Road , Taralai Kalan, Islamabad Capital Territory Schedule:27 Days Quantity:130 / sqft
    Qty: 130
  • Providing laying and applying 3mm thick roof grip water proofing PLASTO GRIP RLA-400 Modified bituminous membrane torch applied polymerized containing non-woven polyester coated, on lower side with PP modified bitumen compound with polyethylene film
    Address:Procurement office , Faculty Block - II , 2nd Floor , Comsats University , Park Road , Taralai Kalan, Islamabad Capital Territory Schedule:27 Days Quantity:130 / sqft
    Qty: 130
  • Providing and applying cement sand (1:4) 1/2" thick plaster on internal/external walls and columns etc; in ground floor including making edges, corners and curing etc. as directed by the Engineer Incharge.
    Address:Procurement office , Faculty Block - II , 2nd Floor , Comsats University , Park Road , Taralai Kalan, Islamabad Capital Territory Schedule:27 Days Quantity:600 / sqft
    Qty: 600
  • Providing and fixing of glazed Champagne anodized or powder coated aluminum openable ventilator as per British standard executive model section single glazed 101mmx37mm and 2mm thick including aluminum jali , the cost of fitting, with all accessories
    Address:Procurement office , Faculty Block - II , 2nd Floor , Comsats University , Park Road , Taralai Kalan, Islamabad Capital Territory Schedule:27 Days Quantity:9 / sqft
    Qty: 9
  • Providing and fixing, 12 mm thick glass door including fix glass also including floor machine, matching hardware, door handles, locking arrangements etc, complete as per direction of engineer incharge.
    Address:Procurement office , Faculty Block - II , 2nd Floor , Comsats University , Park Road , Taralai Kalan, Islamabad Capital Territory Schedule:27 Days Quantity:50 / sqft
    Qty: 50
  • Providing and fixing specific thickness full width Prepolished Granite Slab for top of drinking water area wall 3/4" thick for up to 12 Sft size, including grinding, polishing, making nose, cutting, etc complete as per direction of engineer incharge.
    Address:Procurement office , Faculty Block - II , 2nd Floor , Comsats University , Park Road , Taralai Kalan, Islamabad Capital Territory Schedule:27 Days Quantity:24 / sqft
    Qty: 24
  • Providing and fixing, 16 SWG. Stainless Steel Drain Chanel (Tray), Size 1’ width, 6” deep including fixing arrangements, cutting, welding, Grinding, painting, nuts, bolts and washers etc, complete as per Drawing and direction of engineer incharge.
    Address:Procurement office , Faculty Block - II , 2nd Floor , Comsats University , Park Road , Taralai Kalan, Islamabad Capital Territory Schedule:27 Days Quantity:13 / ft
    Qty: 13
  • Providing and installation of UPVC class-B drainage pipes including cost of all kinds of fittings such as Wye, Tee, Sockets, Reducers Hangers/supports/paint/making and repair of holes in slab/wall, excavation and back filling and as required for comp
    Address:Procurement office , Faculty Block - II , 2nd Floor , Comsats University , Park Road , Taralai Kalan, Islamabad Capital Territory Schedule:27 Days Quantity:30 / ft
    Qty: 30
Eligibility Criteria Summary
Eligibility Criteria
Construction of Room for Filtration Plant and Drinking Water Area adjacent to AB-2. EFS 79806 P150441
Comsat University , Islamabad (Comsats University, Islamabad) , Procurement office , Faculty Block - II , 2nd Floor , Comsats University , Park Road , Taralai Kalan
QR Code
Bidder's Type

Any

Required Registration

NADRA CITIZENSHIP (CNIC/NICOP)

FBR (NTN)

FBR (GSTN)

Eligibility Criteria Document
1. work strictly in accordance with the approved specifications/details shall be accepted.
2. Bidders only from Rawalpindi/Islamabad shall be qualified. The business address would be visited.
Samples of the required items shall be sought from the vendor, wherever applicable, for verification and evaluation purposes. The selection of the most advantageous bidder shall be made on the basis of the evaluation of the submitted samples. for any query contact on 0334 5464232
4. The CUI reserves the right to increase or decrease the quantities, as per applicable rules and requirements. The CUI shall not bear any cost whatsoever relating to the manufacture, transportation, delivery, or any other expense associated with the submission of samples.(Where samples are required). In case of any dispute arising in connection with the matter, the decision of the Rector/In-Charge Campus, CUI, shall be considered final and binding.
5.The procurement method/mode is on a lot basis; however, the participating bidder should be required to provide an item-wise price breakup (Quotation on letter head) in PKR for each quoted item at the time of uploading. And it is mandatory.
6. The participating bidder shall provide/attach separate and valid proof/documents of FBR GSTN (GST Registration Number) and FBR NTN (National Tax Number), along with their updated status/position separately. In case of non-compliance, failure to provide the required documents, or submission of invalid/outdated information, the bidder shall be declared Non-Responsive/Disqualified.
7. Attach a certificate that in case of successful bidder and refusal to accept the LOA OR after acceptance, refusal to take up the job/delivery of items, I am in consent that CUI would impose BAN from business with my firm for a period of ONE YEAR effective immediate.

⏳ Time Left for Bid Submission Deadline

00
Days
00
Hours
00
Minutes
00
Seconds